10 Ways to Turn on a Chromebook Without the Power Button

Have you ever encountered a situation where your trusty Chromebook won’t turn on because the power button seems unresponsive or faulty? You might think it’s a dead end – but don’t worry! There’s often a workaround for powering up your device without using the power button. Whether it’s for convenience or necessity, learning this can be a real game-changer. In this guide, we’re going to walk you through some simple steps to revive your Chromebook without the traditional on/off switch. We’ll ensure the process is clear and straightforward, so you can get back to using your device with minimal fuss. So, let’s get started!

Force Chromebook Reboot 1024x746 1

Solution 1: Use the Keyboard


Sometimes, you may find yourself in a situation where your Chromebook’s power button is not functioning properly. This could be due to a variety of reasons, such as a broken button or temporary malfunction. Whatever the cause, you may need to turn on your Chromebook without using the power button. Fortunately, several Chromebook models offer a feature that lets you turn on your device through a keyboard sequence. One common method involves using the “Refresh” key alongside another action, typically plugging in the charger. This method takes advantage of the built-in keyboard shortcuts that are designed to perform special functions on Chromebooks.


To turn on your Chromebook using the keyboard, follow these detailed steps:

  1. Ensure your Chromebook is completely shut down and not in sleep or hibernation mode. If necessary, wait for a few moments after your Chromebook has powered off to make sure it has fully transitioned to an off state.
  2. Connect your Chromebook to the charger. Find the charging port on your Chromebook and plug the charger into the port. Once connected, you should see an LED light indicating that the device is charging.
  3. Locate the “Refresh” key on your Chromebook’s keyboard. This key often looks like a circular arrow (sometimes reminiscent of the recycling logo) and is typically found above numbers 3 and 4 on the top row of keys.
  4. Press and hold down the “Refresh” key. While holding the “Refresh” key, plug your charger into the Chromebook’s charging port if you haven’t done so already.
  5. With the “Refresh” key held down and the charger connected, your Chromebook should begin the startup process. Keep in mind that the response time might not be instantaneous. Wait a few seconds to see if the Chromebook powers on.
  6. Once your Chromebook starts up, release the “Refresh” key. Your device should boot up normally and take you to the login screen or desktop environment, depending on your settings.


Using the keyboard to turn on a Chromebook is a convenient workaround when faced with a non-functional power button. This method can quickly become a go-to solution, as it leverages the built-in capabilities of the device without requiring additional tools or complex procedures. The benefits are clear: simplicity, no cost, and the avoidance of opening the device or seeking immediate professional help, which may be inconvenient or costly.

However, there could be some potential downsides. This solution does not work on all Chromebook models, so users with devices lacking this feature will need to try other methods. Additionally, if the underlying issue with the power button is a symptom of a more significant problem, using the keyboard as a stopgap solution may not address the root cause. In such cases, professional evaluation and repair may eventually be necessary to ensure the long-term functionality and reliability of your Chromebook.

Solution 2: Open the Lid


For those Chromebook users who are finding themselves in a situation where the power button is unresponsive or perhaps has become damaged, there is a very user-friendly built-in feature that might just solve the problem – opening the lid of the Chromebook. This approach hinges on a design functionality that automatically wakes the device from a sleep state or turns it on when the lid is lifted. This is akin to opening the cover of a book to start reading; it’s a natural action to use a device.

This convenient feature is especially helpful as it requires no technical knowledge or interaction with the system’s internal hardware. It is important to note, however, that this will only work if the Chromebook was previously shut down properly or is sleeping, and not if it was forcefully powered off or has run out of battery.


Here is how to attempt turning on your Chromebook by simply opening the lid:

  1. Position the Chromebook: Place the Chromebook on a stable surface to avoid any unintended damage.
  2. Check the Battery Indicator: Before attempting to open the lid, check if there’s any indicator light that shows the battery status. If there is no light, the battery may be depleted, and you’ll need to connect the charger before proceeding.
  3. Connect the Charger (if applicable): If the battery is dead, connect the charger to your Chromebook and wait a few minutes to allow the battery to charge sufficiently.
  4. Open the Lid: Gently lift the lid of your Chromebook. Ideally, do so to a typical usage angle, around 90 degrees or more, depending on the design of your Chromebook. This is the action that can signal the device to turn on.
  5. Check the Screen: Upon opening the lid, watch the screen for any sign of life. Look for the manufacturer’s logo, a login prompt, or any lighting changes that would indicate the Chromebook is starting up.
  6. Wait for the Boot Process: If the screen turns on, give your Chromebook a few moments to complete its boot process. Chromebooks are typically fast to start, so this shouldn’t take long.
  7. Attempt to Sign In: Once you see a login screen, proceed to sign in as you would normally do.
  8. Troubleshooting: If the Chromebook does not turn on, ensure it is sufficiently charged and that you haven’t missed any visual or auditory cues that indicate it is starting up.


Using the lid to turn on a Chromebook offers a straightforward and convenient method for users who may be facing issues with their power button. It eliminates the technical complexities of activating power without any external tools or advanced knowledge. This method is also very intuitive, aligning with the natural action of opening a laptop to use it, thus making it highly accessible for users of all ages and technical abilities.

However, the potential downside to this approach is its dependence on the Chromebook’s pre-configured settings and battery power. If the battery is completely drained, or if the setting to wake upon opening has been disabled (a less common scenario), this method will not work. In such cases, it may be necessary to explore additional solutions or seek professional assistance. Despite these potential limitations, the open-lid method remains a first-line solution due to its simplicity and ease of use.

Solution 3: Connect to a Charger


When the power button on your Chromebook is unresponsive, it might feel like you’re locked out of your device. However, there is a versatile and straightforward method to coax your Chromebook back to life without using the power button: connecting it to its charger. This approach is particularly useful if the Chromebook has been unused for an extended period and its battery is completely drained. The assumption here is that when the battery gets some charge, the device’s built-in mechanisms trigger it to boot up as part of its regular charging behavior.


  1. Locate the Charger: Find the charger that came with your Chromebook. It’s important to use the original charger or one that’s fully compatible to avoid any potential power issues.
  2. Connect to Power Source: Plug the charging adapter into a wall outlet. Ensure that the outlet is functioning by checking if other devices charge when plugged into the same outlet.
  3. Attach the Charger to the Chromebook: Take the other end of the charger and connect it to the charging port on your Chromebook. Make sure the connection is secure. Some Chromebooks have an LED indicator that will light up when the device is charging.
  4. Wait for the Automatic Boot-up: After connecting the charger, give your Chromebook some time. Some models are designed to automatically turn on once they start charging, especially if the battery was fully depleted before charging.
  5. Look for Signs of Life: Watch for any activity on your Chromebook’s screen. You might also notice the LED charging indicator change colors or blink to signal that the device is powering on.
  6. Check If the Chromebook Is Turned On: If there’s no immediate sign that your Chromebook is turning on, give it a few minutes as the battery might need to reach a minimum charge level before the device powers on.
  7. Try Opening the Lid: If the device doesn’t power on while closed, try opening the lid. This can signal the device to initiate the boot process, especially in tandem with charging.
  8. Unplug and Replug if Necessary: If you’ve waited and still nothing happens, unplug the charger, wait a few seconds, then plug it back in. This action can reset the charging process and trigger the boot sequence.


The “Connect to a Charger” method is an excellent troubleshooting step, as it can be effective without requiring any technical expertise. The benefits of this method include its simplicity, the avoidance of any hardware modifications, and that it uses the device’s built-in mechanisms. However, the potential downside is that it might not work if the battery is damaged or if there are more substantial hardware issues preventing your Chromebook from turning on. If your Chromebook does not turn on after trying this method, it may require further diagnosis by a professional.

Solution 4: Check for Alternative Power Buttons

Sometimes, the most commonly used power button may stop functioning due to various reasons like physical damage or internal faults. However, many Chromebook models include redundant or alternative power buttons that can be used in these scenarios. These alternative buttons are typically located in less obvious places, such as on the side panels, near the ports, or integrated within the keyboard itself. This backup option is particularly useful because it can help you power on your Chromebook without having to resort to more complex solutions or professional repairs.

Understanding where these buttons are located and how to use them requires some knowledge about your specific Chromebook model. Most often, these alternative power controls are intended for situations like the one you’re experiencing, so it’s advantageous to know how to use them effectively.

  1. Identify Your Chromebook Model:
    Before you start looking for alternative power buttons, you need to know exactly what model you have. This information is usually found on the bottom of the device or within the system settings if you can power it on. You can then use this information to look up the user manual online if you don’t have it on hand.
  2. Consult the User Manual or Manufacturer’s Website:
    Once you know your Chromebook model, find the user manual on the manufacturer’s website. Most manufacturers provide digital copies of their manuals, which can be a critical resource. Look in the manual for any mention of “power button,” “alternative power options,” or “power control.”
  3. Examine Your Chromebook:
    While referring to your manual, examine your Chromebook closely. The alternative power button could be on the side of the device, near the ports, on the keyboard (often a secondary function of another key), or even on the display bezel. It usually stands out from other keys but can be discreetly designed to maintain the aesthetics of the device.
  4. Use the Alternative Power Button:
    Once you’ve located the alternative power button, attempt to power on your Chromebook by pressing it. This may require a simple press, or it might need to be held down for a few seconds, depending on the design. Refer to the user manual for specifics about how long and with what type of press (soft or firm) you should expect to use.
  5. Check for Indicators:
    Upon pressing the alternative power button, look for any power indicators that signify the Chromebook is turning on. This could be in the form of LED lights on the device or sounds that it might make.
  6. Troubleshoot if Necessary:
    If the Chromebook does not power on, make sure it’s not a charging issue by connecting it to the charger before trying again. If it still doesn’t power on, repeat the steps to ensure you’re applying the correct procedure.

Using an alternative power button can be a convenient and straightforward solution to turn on your Chromebook without the standard power button. It’s non-invasive and doesn’t require any technical knowledge beyond locating and pressing a button. This method is particularly beneficial because it doesn’t involve manipulating the device’s hardware or settings.

However, there are potential downsides: not all Chromebooks have an alternative power button, and even if they do, it might not be functional due to the same issue affecting the primary power button. Additionally, if the user manual is not readily available or the Chromebook model specifics are hard to find, identifying the correct button may become a challenge.

Nevertheless, for most users, this solution remains the safest and simplest next step when facing a non-functioning primary power button on a Chromebook. If successful, it allows you to bypass a potentially faulty power button without compromising the functionality of your device.

Solution 5: Use a Magnet


The solution involving the use of a magnet may sound unconventional, but many laptop manufacturers, including those that produce Chromebooks, install magnetic sensors in their devices. These sensors detect when the lid of the Chromebook is closed or open by sensing the presence or absence of a magnet typically placed in the lid. When you open the lid, the sensor no longer detects the magnet, signaling the device to wake up or turn on. If the power button is inoperative and you need to turn on your Chromebook, simulating the action of opening the lid with a magnet can be an effective workaround.


Here is a careful guide for using a magnet to turn on your Chromebook:

  1. Locate the Sensor:
  • Start by finding out where the magnetic sensor is on your Chromebook. This is often near the edge of the base, close to where the lid’s magnet would be when the Chromebook is closed. If you’re uncertain, you can search online for the sensor location specific to your Chromebook model.
  1. Prepare a Magnet:
  • Find a small magnet. This could be a fridge magnet or any other type of small household magnet that is strong enough to trigger the sensor.
  1. Test the Magnet:
  • Gently move the magnet along the presumed location of the magnet sensor on the base of the machine. When you find the right spot, your Chromebook will react as if you’re opening the lid. The screen should turn on, and the device should start booting up.
  1. Be Gentle:
  • It’s important to use the magnet lightly and not to leave it on the Chromebook for longer than necessary. Prolonged exposure to strong magnets may potentially harm electronic components, although the risk is low with small, weak magnets.
  1. Troubleshooting:
  • If your Chromebook does not turn on after running the magnet over the sensor area, check to ensure that the battery is not completely drained. If it is, you may need to connect the charger before attempting the magnet method again.


Using a magnet to turn on a Chromebook without a power button is a creative approach that exploits the device’s built-in sensors. This method has the benefit of being quite simple and does not require any technical expertise or opening of the device, making it suitable for users without technical backgrounds. However, caution should be exercised to avoid harming the machine with a too-strong magnet or by scratching the Chromebook’s surface with it. If this method proves unsuccessful, it may be indicative of a different issue, or you may need to explore one of the other mentioned solutions.

Solution 6: Disconnect and Reconnect the Battery


Sometimes, electronic devices can become unresponsive due to software glitches or battery issues. One of the methods to potentially resolve such issues with a Chromebook is by disconnecting and then reconnecting its battery. This process can reset the system’s internal circuitry and potentially fix the problem that’s preventing it from turning on. It’s a bit like giving your Chromebook a fresh start. This approach is somewhat more technical and may not be suitable for everyone, especially if your Chromebook is still under warranty, as opening the device could void it.


Before you proceed, note that this method involves handling the internal parts of your Chromebook, which could potentially damage the device if done incorrectly. Only proceed if you feel comfortable with this risk, and consider consulting professional help if you’re unsure.

  1. Prepare your workspace: Make sure you have a clean, well-lit workspace with a small Philips-head screwdriver, a plastic spudger, or a similar non-conductive prying tool.
  2. Power off Chromebook: Ensure your Chromebook is completely turned off and unplugged from any power source.
  3. Remove screws from the back cover: Flip your Chromebook over and remove all the screws holding the bottom cover in place. Keep the screws in a safe spot where they won’t get lost.
  4. Remove the back cover: Gently pry the back cover off using the plastic spudger. Start from one corner and work your way around the edges. Be careful to not apply too much force to avoid breaking any plastic clips that might also be holding the cover.
  5. Locate the battery: Once inside, you should see the battery, which is often a black rectangle with wires running to a connector on the motherboard.
  6. Disconnect the battery: Carefully disconnect the battery cable from the motherboard. You might need to gently lift a locking bar or press on a release clip, depending on the Chromebook model.
  7. Wait a few minutes: After disconnecting the battery, wait for about 3-5 minutes. This pause allows any residual power in the system to dissipate, which can help reset the hardware.
  8. Reconnect the battery: Reconnect the battery connector to the motherboard, ensuring it is securely attached and locked in place if applicable.
  9. Reassemble the Chromebook: Place the back cover on and press down around the edges and center to secure any clips. Then, replace and tighten the screws you removed earlier.
  10. Attempt to power on the Chromebook: Once everything is put back together, try to turn on your Chromebook as you normally would.


Disconnecting and reconnecting the Chromebook battery could potentially reset hardware glitches and allow you to turn on your device without a functional power button. Doing this could bypass certain issues that a software reset wouldn’t resolve.

However, the benefits come with potential downsides. This method can be risky for those not experienced with electronics, as it involves opening the device and potentially damaging sensitive components. It might also void any existing warranty. Moreover, the process is not applicable for all Chromebook models, particularly those with a sealed battery compartment or built-in batteries that are not designed to be easily disconnected.

For those who are not comfortable performing these steps, seeking help from a professional technician is the recommended approach to avoid damage and ensure the safety of both the user and the device.

Solution 7: Use the Reset Hole


Most gadgets today come with a small, often overlooked feature known as a “reset hole.” This is typically a tiny recessed button that you can press to reset the device or, in some cases, power it on. Chromebooks, being the user-friendly devices they are, may include this feature too. It’s intended as a troubleshooting step or a way to revive a Chromebook if the power button becomes unresponsive or damaged. Utilizing the reset hole is a straightforward procedure, but it’s crucial to perform it correctly to avoid any potential damage to your Chromebook.


  1. Locate the Reset Hole: Carefully inspect your Chromebook to find a tiny hole labeled as the reset hole. It might be on the back, side, or bottom of the Chromebook. If you’re having trouble identifying it, consult the user manual or look up the model online for guidance.
  2. Prepare a Suitable Object: Find a small, thin object like a paperclip, a pin, or a SIM ejection tool. It needs to be small enough to fit into the hole without exerting undue force, which could damage your device.
  3. Turn Off Your Chromebook Completely: Before proceeding with the reset, make sure your Chromebook is completely turned off. If it’s simply in sleep mode, you’ll need to shut it down fully.
  4. Insert the Object into the Hole: Take your small object and gently insert it into the reset hole. You’ll feel a button inside the hole; when you press it, there should be a slight click. This is the reset button being engaged.
  5. Press and Hold: Press down gently but firmly and hold the button down for the duration mentioned in the user manual—typically around 10 to 30 seconds. This action varies depending on the Chromebook model, so it’s wise to check the specific timing for your device.
  6. Wait for the Chromebook to Turn On: After holding the reset button for the necessary amount of time, release it and wait. Your Chromebook should begin to turn on. You may see some lights blink or hear a startup sound, depending on your model.
  7. Allow the Chromebook to Boot Up: If the reset was successful, the Chromebook should boot up as usual. At this point, proceed to log in and use your device as normal.


Using the reset hole to turn on your Chromebook can be an effective solution when the power button is not functioning. It’s a useful method that is built into many devices as a failsafe for situations like this. The benefit of this solution is that it’s relatively simple and can save you from unnecessary repairs or service charges. However, it’s important to handle this process with care to avoid damaging the internal button or the surrounding area of your Chromebook. Additionally, not all Chromebooks come equipped with a reset hole, so this method won’t be applicable to every model. Always ensure you’re following the procedure that is suited to your specific device to avoid any potential mishaps.

Solution 8: Utilize USB Wake Support


Many modern laptops, including some Chromebooks, have a feature called USB Wake Support or USB wake-up. This is designed to allow external peripherals, like a mouse or keyboard, to wake the computer from a sleep state. However, it can sometimes be used to power on the machine when the power button is not functioning.

This feature, when enabled, listens for a signal from USB devices when they are connected or a button on them is pressed. It’s a convenient way to turn on your device without reaching for the power button, especially if the power button is broken or inaccessible.

Keep in mind that this method may not work on all Chromebooks, as it depends on the Chromebook’s support for USB wake-up from a powered-off state and whether this feature is enabled in the BIOS (basic input/output system) settings, which is firmware that initializes hardware during the booting process.


  1. Check if USB Wake Support is Enabled:
  • For most users, accessing the Chromebook’s BIOS to enable USB Wake Support may be challenging since Chromebooks do not have a traditional BIOS interface like other PCs. However, the feature may already be enabled by default. If not, enabling it might be difficult without technical know-how or might void the warranty. Therefore, we’ll proceed on the assumption that it’s already enabled.
  1. Power Down the Chromebook Completely:
  • Ensure that your Chromebook is completely shut down and not in sleep or hibernation mode.
  1. Connect a USB Peripheral:
  • Plug a USB device, such as a mouse or a keyboard, into one of the USB ports on your Chromebook.
  1. Attempt to Wake the Chromebook:
  • Try clicking a button on the mouse or pressing a key on the keyboard. If USB wake-up is supported and active, this action may power on your Chromebook.
  1. Check for Signs of Power:
  • Watch for any indications that the Chromebook is turning on, such as the display lighting up or hearing the startup sound.
  1. Attempt Multiple USB Ports if Necessary:
  • If the first attempt doesn’t work, try plugging the USB device into a different port. Some Chromebooks may have specific ports that are enabled to wake the system.
  1. Have Patience and Repeat if Necessary:
  • Sometimes, you may need to try pressing buttons on the USB device multiple times or hold them down for a bit longer to trigger the wake signal.


Using USB Wake Support to turn on your Chromebook can be an easy and quick solution when the power button is not an option. However, not all Chromebooks support waking from a completely powered-off state through USB devices. This solution is best suited for situations where the Chromebook is in a low-power state like sleep or hibernation.

The benefits of this method include convenience and the potential to revive a Chromebook when other methods have failed. The downside is that it may not work for every Chromebook, and the feature might not be forwardly accessible without going into advanced settings or may not be available at all if the device is fully powered off as opposed to being in sleep mode. If unsuccessful, you would need to explore alternative solutions or seek professional assistance.

Solution 9: Perform a Hard Reset


A hard reset, oftentimes referred to as a powerwash in the context of Chromebooks, is a process that forces your device to restart and can fix various issues, including problems with powering on. It’s akin to resetting your Chromebook’s system without using the typical power-on method. This procedure can often resolve software glitches that may prevent your Chromebook from starting up properly. However, the term “hard reset” can sometimes be confused with “factory reset,” the latter of which erases all data on the device. A hard reset simply restarts the Chromebook and does not delete any personal information. It’s important to distinguish between these two, as our focus here is on rebooting the device, not wiping its data.


  1. Check Device Support: Initially, you should verify that your Chromebook model supports a hard reset without using the power button. You can find this information in the device’s manual or online support pages.
  2. Prepare Your Chromebook: Ensure your Chromebook is connected to its charger to prevent it from powering off due to a low battery during the process.
  3. Locate the Refresh Key: On your keyboard, look for the key with an arrow circling clockwise. This is usually located at the top row of the keyboard and is called the “Refresh” key.
  4. Perform the Hard Reset: While keeping the charger connected, hold down the “Refresh” key. With another finger, press and hold the “Power” button if it’s accessible and not damaged. If your power button is not functioning at all, skip pressing it.
  5. Release the Refresh Key: After holding down the “Refresh” key for about 10 seconds, release it. This action should prompt your Chromebook to start up. If you could press the power button, release it after releasing the “Refresh” key.
  6. Observe the Results: Watch for any signs of life from your Chromebook, such as the startup screen or the sound of the device booting up.
  7. Confirm Functionality: Once your Chromebook has powered on, check to ensure it’s operating as expected. Open a few apps or restart the device to make sure the hard reset procedure has fully resolved the issue.


Executing a hard reset can be a highly effective solution when your Chromebook’s power button is inoperative or when the device itself seems unresponsive. It’s a relatively simple process that can circumvent the need for a functioning power button and can resolve many temporary software issues that might prevent your Chromebook from turning on.

The benefits of this method include its simplicity and the fact that it does not involve any potential data loss since it doesn’t erase personal files or settings. Moreover, it can be performed by any user without the need for specialized technical knowledge or tools.

On the downside, a hard reset may not always solve more serious hardware problems, which could be the underlying cause for the Chromebook failing to turn on. Additionally, this procedure may only offer a temporary fix if there are underlying issues that require attention, and it might not work on all Chromebook models.

If a hard reset doesn’t resolve the power-on issue, or if you’re uncomfortable with performing these steps, you may need to consider seeking professional repairs as further troubleshooting may require technical expertise beyond a simple reset.

Solution 10: Seek Professional Repairs


At times, despite your best efforts, technology can be stubborn, and your Chromebook might not turn on using the typical at-home techniques detailed in options 1 through 9. When these solutions don’t work, it could be indicative of a deeper hardware issue that requires an expert’s touch. Seeking professional repairs is a logical step when you’ve exhausted your DIY options. Professional technicians possess the tools, knowledge, and replacement parts necessary to diagnose and fix problems that are beyond the scope of a user without technical experience. This guide will walk you through the steps of how to proceed with obtaining professional repairs for your Chromebook.


  1. Identify Authorized Service Providers:
  • Research to find authorized service centers for your Chromebook. This information can usually be found on the manufacturer’s website. Authorized centers will have technicians trained specifically for your device.
  1. Gather Important Information:
  • Before contacting the service provider, make sure you have your Chromebook’s make, model, and serial number on hand. Also, be ready to describe the issue clearly, including any troubleshooting steps you’ve already attempted.
  1. Backup Your Data:
  • If possible, back up your data. If your Chromebook won’t turn on at all, that might not be an option, but if you have any access to your files, try to copy them to an external drive or cloud storage.
  1. Contact the Service Provider:
  • Reach out to the service center to explain the problem and inquire about the process for repairs. They might request an in-person appointment or the shipping of your device to their location.
  1. Get an Estimate:
  • Seek an estimate for the repairs. It’s important to have a rough idea of costs beforehand, as some repairs can be expensive and may influence your decision on whether to repair or replace the device.
  1. Service and Repair:
  • Follow the service provider’s instructions to either bring in or send your Chromebook in for repair. Make sure to keep any service agreement documents or shipping receipts.
  1. Review and Verify:
  • Once the repairs are completed, review the service provided and check your Chromebook thoroughly to ensure the problem has been resolved. Verify that it powers on as intended.
  1. Provide Feedback:
  • Consider providing feedback on your experience with the service. This can help future customers and might also improve the service provider’s processes.


Seeking professional repairs ensures that your Chromebook is handled by experts who can identify the root cause of the problem and provide a lasting solution. The benefits of this approach include reliable repair work and possibly a warranty on the service provided. However, the downsides may include the potential cost, which can sometimes be high, and the time without your device while it is being repaired. It’s also worth noting that if your Chromebook is older, you may want to consider whether it is more cost-effective to invest in repairs or to purchase a new device. Even with these considerations, when all at-home solutions have failed, professional repairs are your best bet for a resurrected and fully functional Chromebook.
In conclusion, powering up a Chromebook without a functioning power button might seem tricky, but with the methods outlined—like using keyboard shortcuts, opening the lid, or connecting to a charger—you can bring your device back to life. Remember to treat your Chromebook with care, and if the power button issue persists, consult with a professional for repairs. The workarounds provided can be lifesavers, especially when you need quick access to your Chromebook, ensuring that your digital life stays uninterrupted.


  1. Can I permanently fix my Chromebook’s power button myself?
    In some cases, you may be able to fix the power button if the issue is minor, such as debris obstructing the button’s movement. However, for electrical faults or broken components, it’s best to seek professional repair to avoid further damage to the Chromebook.
  2. Will these methods work on all Chromebooks?
    These methods are general and should work on most Chromebook models, but some older devices might not respond to certain shortcuts or may not power on when the charger is plugged in. Check your device’s specific guidelines.
  3. What should I do if these methods don’t work?
    If none of the methods work to power on your Chromebook, the issue might be more serious, such as a depleted battery or internal hardware failure. In this case, consult the manufacturer’s support or a certified technician.
Larry R. Jimenez
I'm the senior editor of I help people solve their computer problems and recommend reliable products. My area of expertise includes electronic or hardware products, Windows, Mac, and application tricks. I'm active in the various online tech communities where he provides help for new computer issues as they are released.

You may also like

Leave a reply

Your email address will not be published. Required fields are marked *

More in How-To